User manual

MRD 3187B User Manual
Page 154
5.4 Unit
This section will describe what information is included
under the tab.
5.4.1 Active Errors
The first thing under this tab is the
“Active Errors.” If any of the status
indicators across the top of the web client
are indicating an error (i.e. red circle) this
section will give a more detailed
description of the specific error along with
the location of the item that is producing
the error.
5.4.2 Event Logging
Just below the “Active Errors” is the “Event Logging”
section. This section shows all the possible events that
the MRD 3187B will log. Follow the steps below to
either enable or disable an event.
1. Click the button under the “Event Logging”
heading. This will bring up a new edit form in the
middle of the screen.
2. Choose either the “General, Video, Audio, DPI, or
System” tab to enable or disable events under those
headings.
3. Then click the button, at the bottom of the
form, to save the settings.
5.4.3 Unit Date/Time
The next section is the “Unit Date/Time” section. This
section gives an overview of how to configure the date
and time of the unit.
1. Click the button under the “Unit Date/Time”
heading. This will bring up a new edit form in the
middle of the screen.
2. Use the drop down menu to select either “Auto, or
Manual.”
3. If “Auto” is selected, the option to use a time server is
available. Enter the IP address of the Time Server in
the space provided.
4. Then click the button to save the changes.