User manual

MRD 3187B User Manual
Page 138
Menu
SNMP
►SMPTE 333M
System
SMPTE 333M
►333M: Enabled
Menu
►Active Errors
Event Log
Network
Active Errors
0-0 Fan
1-0 No TS Present
1-4 Low Level
4.22 SMPTE 333M Configuration
Description: The MRD 3187B can be configured to output SMPTE 333M Closed Caption
signals from the SMPTE 333M port on the back of the unit.
Configuration
1. Press the button.
2. Use the and button to move the cursor
to, “SMPTE 333M,” then press the button.
3. Press the button one more time to edit,
“333M:”
4. Use the and buttons to enable or
disable SMPTE 333M, then press the
button to save the selection.
4.23 Active Errors
Description: Whenever an error occurs on any of the four internal status indicators in the
MRD 3187B, the Error LED will illuminate on the front panel and the details of the error
will be listed in the Active Errors. An extensive listing of errors and their definitions is
included in Appendix B.
Active Errors Display
To display the current errors on the unit use the
following steps:
1. Press the button.
2. Use the and buttons to move the cursor
to, “Active Errors,” then press the
button.
3. Use the and buttons to scroll through
the list of errors. The number in front of the
error indicates which card the error is on (e.g.
“1-4 Low Level” = RDS1, Card 4 has
dropped below the user defined RF level
threshold).