User manual

MRD 3187B User Manual
Page 136
Network
Dhcp: off
IP Address
► 000.000.000.000
Network
000.000.000.000
Subnet Mask
► 255.255.255.000
Network
255.255.255.000
Gateway
► 000.000.000.000
Network
►Dhcp: off
IP Address
000.000.000.000
Menu
Error List
►Network
Password
Network
►Dhcp: on
IP Address
000.000.000.000
4.21 Network Setup
Description: The MRD 3187B can be setup on a network connection to allow remote
management and SNMP configuration. For these features to work, the network settings
for the MRD 3187B must first be configured properly for the network it is connected to.
Static IP Address
To setup the MRD 3187B with a static IP address, use
the following steps:
1. Press the button.
2. Use the and buttons to move the cursor
to “Network,” then press the button.
3. Use the and buttons to move the cursor
to, “DHCP:” then press the button.
4. Use the and buttons to change the
selection to, “off,” then press the button to
save the selection.
IP Address/Subnet Mask/Gateway
1. Use the and buttons to move the cursor
to, “IP Address,” then press the button.
2. Use the and buttons to select the
column to edit and use the and buttons
to change the IP, then press the button to
save the selection.
3. The cursor will now be on, “Subnet Mask.”
4. Use the and buttons to select the
column to edit and use the and buttons
to change the Subnet Mask, then press the
button to save the selection.
5. The cursor will now be on, “Gateway.”
6. Use the and buttons to select the
column to edit and use the and buttons
to change the Gateway, then press the
button to save the selection.
DHCP
The MRD 3187B can be configured to use DHCP to
obtain an IP address/Subnet Mask/Gateway.
1. Use the and buttons to move the cursor
to, “Dhcp:” then press the button.
2. Use the and buttons to change the