User manual

MRD 3187B User Manual
Page 115
RDS1 Serv Setup
Tune Mode: Auto
►Number: -
RDS 1
Sdi Aud Embed
Video Status
►Audio 1 Setup
RDS1 Aud1 Setup
►Type: User
Compress: RF Mode
Downmix: 2/0 LR
Auto Mode
This mode should only be used if no PID
information is known about the stream.
Auto Program
Note: This menu is only available if the “Tune
Mode” is set to “Auto”.
1. Use the and buttons to move
the cursor to, “Auto” then press the
button.
2. Use the and buttons to select
the desired program number in the
stream, then press the button to
save the selection.
Audio 1 Setup
The following menus are used to setup the audio
downmix settings.
Note: Use the following instructions to setup
Audio 1-4 (if equipped).
1. Use the and buttons to move the
cursor to, “Audio 1 Setup” then press the
button.
2. The current screen shows the status of the
audio downmix settings, press the
button again to display the Edit screen.
Type
1. Use the and buttons to move
the cursor to, “Type:” then press the
button.
2. Use the and buttons to select
the desired downmix type (User, Monitor,
Transmission) then press the button
to save the selection.