User manual

MRD 3187B User Manual
Page 113
RDS1 Serv Setup
Tune Mode: No PSI
►PCR PID :0x0000
Video PID :0x0000
RDS1 Serv Setup
PCR PID :0x0010
►Video PID :0x0000
Video Type :------
RDS1 Serv Setup
Video PID :0x0000
►Video Type :------
Audio1 PID :0x0000
RDS1 Serv Setup
Video Type :MPEG 2
►Audio1 PID :0x0000
Audio1 Typ :---------
No PSI Mode
This mode should only be used if both the PID
information and audio/video formats are known
about the stream.
PCR PID
Note: This menu is only available if the “Tune
Mode” is set to “No PSI”.
1. Use the and buttons to move
the cursor to, “No PSI” then press the
button.
2. Use the and buttons to select
the column to edit, then use the and
buttons to select the desired PCR
PID in the stream, then press the
button to save the PID.
Video PID
1. Use the and buttons to move
the cursor to, “Video PID” then press the
button.
2. Use the and buttons to select
the column to edit, then use the and
buttons to select the desired Video
PID in the stream, then press the
button to save the PID.
Video Type
1. Use the and buttons to move
the cursor to, “Video Type” then press
the button.
2. Use the and buttons to select
the video type on the PID chosen above,
then press the button.
Audio 1 PID
1. Use the and buttons to move
the cursor to, “Audio1 PID” then press
the button.
2. Use the and buttons to select
the column to edit, then use the and
buttons to select the desired Audio