User manual

MRD 3187B User Manual
Page 107
MPEG/IP 1-4
►Transmit:Enabled
Phys Conn:Port 1
IP:239.192.0.1
MPEG/IP 1-4
►IP:239.192.0.1
Dest Port:01030
Source Port:01030
MPEG/IP 1-4
IP:239.192.0.1
►Dest Port:01030
Source Port:01030
MPEG/IP 1-4
IP:239.192.0.1
Dest Port:01030
►Source Port:01030
MPEG/IP 1-4
Source Port:01030
►Packets/Ip:7
DiffServ:Default
3. Use the and buttons to move the
cursor to, “Transmit:” then press the
button.
4. Use the and buttons to change the
selection to, “Enabled,” then press the
button to save the selection.
5. Choose the physical connector, “Port1” or
“Port 2” then press the button.
IP
1. Use the and buttons to move the
cursor to, “IP:” then press the
button.
2. Use the and buttons to select
the column to edit and use the and
buttons to change the IP, then press
the button to save the selection.
Destination Port
1. Use the and buttons to move
the cursor to, “Dest Port:” then press the
button.
2. Use the and buttons to select
the column to edit and use the and
buttons to change the destination port
(1025 – 65536), then press the button
to save the selection.
Source Port
1. Use the and buttons to move
the cursor to, “Source Port:” then press
the button.
2. Use the and buttons to select
the column to edit and use the and
buttons to change the destination port
(1025 – 65536), then press the button
to save the selection.
Packets Per Frame
1. Use the and buttons to move
the cursor to, “Packets/Ip:” then press the
button.