User manual

MRD 3187B User Manual
Page 102
MPEG/IP 1-4 2
Ip: 239.192.1.50
►Dest Port: 01050
FEC: Disable
MPEG/IP 1-4 2
Ip: 239.192.1.50
Dest Port: 01050
►FEC: Disable
MPEG/IP 1-4 2
Dest Port: 01050
FEC: Disable
►Null Strip:Disable
MPEG/IP 1-4 2
Null Strip:Disable
►SSRC:Disable
SSRC Filt:0x00000000
Destination Port
1. Use the and buttons to move
the cursor to, “Dest Port:” then press the
button.
2. Use the and buttons to select
the column to edit and use the and
buttons to change the port (1025 –
65536), then press the button to save
the selection.
Forward Error Correction
This setting lets the decoder know if it should
be expecting FEC data with the active receive
group. If no FEC data is expected, this setting
can be disabled to allow multicasts closer
together on the same IP.
1. Use the and buttons to move
the cursor to, “FEC:” then press the
button.
2. Use the and buttons to select
“enable” or “disable”, then press the
button to save the selection.
Null Stripped
This setting is used to allow the MRD 3187B
to receive a null stripped IP stream.
1. Use the and buttons to move
the cursor to, “Null Strip:” then press the
button.
2. Use the and buttons to select
“enable” or “disable”, then press the
btton to save the selection.
Synchronized Source Setup
1. Use the and buttons to move
the cursor to, “SSRC:” then press the
button.
2. Use the and buttons to select
“enable” or “disable”, then press the
button to save the selection.