User manual

MRD 3187B User Manual
Page 101
MPEG/IP 1-4 1
239.192.20.3
Add IP
►Clear All
MPEG/IP 1-4 2
►Receive: Enable
Phys Conn: Port 1
Ip: 239.192.0.1
MPEG/IP 1-4
Active Group:1
Receive 1
►Receive 2
MPEG/IP 1-4 2
►Ip: 239.192.1.50
Dest Port: 01050
FEC: Disable
either Edit or Remove, then press the
button.
Clear All
This option will clear all IP addresses in the
filter list.
1. Use the and buttons to move
the cursor to, “Clear All,” then press the
button.
2. Press the button one more time to
clear all the IP addresses in the list.
Receive 2
This section allows the user to setup the receive
function of the second receive group.
1. Use the and buttons to move the
cursor to, “Receive 2” then press the
button.
2. Use the and buttons to move the
cursor to, “Receive:” then press the
button.
3. Use the and buttons to Enable or
Disable “Receive,” then press the
button to save the selection.
4. Choose the physical connector, “Port1” or
“Port 2” then press the button.
IP
1. Use the and buttons to move the
cursor to, “IP:” then press the
button.
2. Use the and buttons to select
the column to edit and use the and
buttons to change the IP, then press
the button to save the selection.
Note: A Unicast or Multicast IP address may be
chosen.
Unicast: X.X.X.X – 223.255.255.255
Multicast: 224.0.0.0 – 239.255.255.255
Suggested Multicast Range: 239.192.X.X