Instruction manual

EN - 6
7. The year digit will fl ash and Yr icon appears. Press [  ] or [  ]
button to set your desired year. Press [MODE] button to confi rm.
Note: Year range is from 2000 to 2099.
8. D and M icons will fl ash. Press [  ] or [  ] to select D M (Date
Month) or M D (Month Date) format. Press [MODE] button to
confi rm.
9. Month digits will fl ash. Press [  ] or [  ] button to set your
desired month. Press [MODE] button to confi rm. Do the same to
set Date.
Note: The moon phase and the weekday will be automatically
calculated and displayed according to the date set as above.
10. E digit will fl ash. Press [  ] or [  ] button to switch 5 languages
display of weekday (English/German/French/Spanish/Italian. See
table 1). Press [MODE] button to confi rm and exit setting mode.
11. Temperature units will fl ash, Press [  ] or [  ] button to switch
between Celsius and Fahrenheit. Press [MODE] button to confi rm
your desired temperature unit.
12. ON icon will fl ash, Press [  ] or [  ] button to switch between ON
and OFF. Press [MODE] button to confi rm your desired. If it is set
to OFF, then the RCC function will be closed.
Note: If there is no key pressed during setting mode for 10 seconds, it
will automatically keep the setting and exit to normal display.
TO SET DAILY ALARM
1. In clock time display mode, press [MODE] button to select alarm
1 or 2, then hold and press [MODE] again for 2 seconds to access
alarm setting.
2. The hour digits will fl ash, use [  ] button to decrease by one hour
or [  ] button to increase by one hour to your desired hour. Hold
press either button will change the digit rapidly. Press [MODE]
button to confi rm.