SWS 165 INSTRUCTION MANUAL SLIM TOUCH WEATHER STATION WITH 868MHZ REMOTE SENSOR
This unique product is designed for everyday use for the home or office and is a definite asset of great use. To fully benefit from all the features and understand the correct operation of this product, please read this instruction manual thoroughly. FUNCTIONS OF THE WEATHER STATION This weather station measures the environment of its surrounding area and receives weather data transmitting from up to three outdoor thermo-hygrometers for temperature.
H. Remote sensor indicator It is to indicate which channel of remote sensor is being used. It can display up to 3 different remote sensors which are in different locations and within 65 meters (210 feet) distance away from the main unit. I. Auto scroll indicator The arrow icon is shown to indicate the auto scroll of 3 different remote channels. J. Outdoor maximum icon It is to indicate the maximum outdoor temperature/humidity that is being displayed. K.
5. [ CH ] Select among channel 1, 2, 3 or to enter auto scroll mode. Press and hold for 2 seconds to activate or deactivate the sensor searching mode. In RF register mode ( reception of the DCF signal for clock control), press and hold for 2s to exit this register mode. 6. [ MEM ] Press once to view the Max/Min reading of the indoor & outdoor temperature/humidity. After 5 seconds, will go back to current temperature/humidity.
BATTERY INSTALLATION FOR REMOTE SENSOR UNIT 1. Remove the battery cover by grabbing its bottom edge (near the two recess location) from bottom of sensor unit. 2. Insert 2 pieces of AA size batteries according to the “+” and “-” polarity marks shown in the battery compartment and then close the battery door with the clip on. (press down the snap on both sides slightly). Front view Back view WIRELESS REMOTE SENSOR REGISTRATION PROCEDURE 1. Insert 2 pieces of AAA batteries first to the main unit.
1. To retrieve manually the specific sensor temperature and humidity reading, press CH key until desired channel number is displayed 2. To enable auto-scroll function, use CH button to toggle channel 1, 2 or 3 until auto scroll icon appears on the left hand side of the second line display. DCF 77 RADIO CONTROLLED CLOCK The radio-controlled time is calculated by the Cesium Atomic clock of Braunschweig (official clock of Germany).
. 8. 9. 10. 11. 12. The year digit will flash and Yr icon appears. Press [ ] or [ ] button to set your desired year. Press [MODE] button to confirm. Note: Year range is from 2000 to 2099. D and M icons will flash. Press [ ] or [ ] to select D M (Date Month) or M D (Month Date) format. Press [MODE] button to confirm. Month digits will flash. Press [ ] or [ ] button to set your desired month. Press [MODE] button to confirm. Do the same to set Date.
3. The minute digits will flash. Use [ ] button to decrease by one minute or [ ] to increase by one minute to your desired minute. Hold press either button will change the digit rapidly. Press [MODE] button to confirm. The unit will show the alarm time for 10 seconds and exit to clock time display automatically. The alarm bell icon will be turned on in clock time display to indicate that the daily alarm is enabled.
SPECIFICATIONS Main Unit Displayed IN temperature range Proposed operating range Temperature resolution Remote Temperature measurement Displayed OUT temperature range Temperature resolution : -10°C to +60.0°C : 0°C to +50.0°C : 0.1°C : -20.0°C to +60.0°C : 0.1°C Indoor/Remote relative humidity measurement Displayed Relative Humidty range : 20%RH to 99%RH Measured temperature range : -10°C to +50.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste.
EN Warranty conditions Warranty card is not a part of the device packaging. This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited to the following conditions. Warranty is referred only to the customer goods using for common domestic use. The claim for service can be applied either at dealer’s shop where the product was bought, or at below mentioned authorized service shops.
