User manual

08/2018

- 2 -

Hair clipper

Important safety instructions

READ CAREFULLY AND STORE FOR FUTURE USE.

General warnings

■ This appliance may be used by children 8 years of age and older and by persons

with physical or mental impairments or by inexperienced persons, if they are

properly supervised or have been informed about how to use the appliance in

asafe manner and understand the potential dangers.

■ Children must not play with the appliance. Cleaning and maintenance performed

by the user must not be performed by unsupervised children.

Electrical safety

■ Do not disconnect the power adapter from the power socket by pulling on the

power cord. This could damage the power adapter or the power socket. Disconnect

the power adapter from the power socket by pulling on the plug.

■ Do not place the power cord of the power adapter over sharp objects. Make sure

that the power cord does not hang over the edge of atable and that it is not

touching aheated surface.

Attention:

The hair clipper must only be used with the original power adapter that

came with it. In order to avoid adangerous situation from arising, never

use adifferent type of power adapter.

■ Never use the power adapter supplied with this hair clipper for any other purposes.

■ Keep the power adapter and its power cord dry.

■ Do not wind the power cord of the power adapter around the handle of the hair

clipper.

■ If the power cord of the power adapter is damaged, it must be replaced by the

manufacturer, its service technician or by asimilarly qualified person, as this will

prevent adangerous situation from arising.

■ Do not connect and disconnect the power adapter cord to and from the power

socket with wet hands.

■ Before connecting the power adapter to apower socket, check that the voltage on

its rating label corresponds to the voltage in the power socket to which you wish

to connect it. Do not use an extension cord.

■ Store, charge and use the hair clipper at an ambient temperature of 15 to 35 °C. Do

not charge the hair clipper for longer than is necessary for it to fully charge. Once

it is charged, disconnect it from the power socket.