Technical data

Appendix
27.6 Sample Programs
Programming with STEP 7
Manual, 05/2010, A5E02789666-01 635
Deleting and Installing the Supplied Sample Projects
The supplied sample projects can be deleted in the SIMATIC Manager and then reinstalled. To
install the sample projects, you must start the STEP 7 V5.0 setup program. The sample projects
can be installed selectively at a later date. Copies of the supplied sample projects and self-created
sample projects made using the menu command "Save As" can only be saved as user projects.
Note
When STEP 7 is installed, the supplied sample projects are copied, unless otherwise specified. If you
have edited the supplied sample projects, these modified projects are overwritten with the originals
when STEP 7 is reinstalled.
For this reason, you should copy the supplied sample projects before making any changes and then
only edit the copies.