Technical data

Diagnostics
23.4 Diagnosing Hardware: Diagnostic View
Programming with STEP 7
482 Manual, 05/2010, A5E02789666-01
23.4 Diagnosing Hardware: Diagnostic View
23.4.1 Calling the Diagnostic View
Using this method you can open the "Module Information" dialog box for all modules in the rack.
The diagnostic view (configuration table) shows the actual structure of a station at the level of the
racks and DP stations with their modules.
Note
• If the configuration table is already open offline, you can also get the online view of the configuration table
using the menu command Station > Open Online.
• Depending on the diagnostics capability of the module, a varying number of tabs are displayed in the
"Module Information" dialog box.
• In the "Accessible Nodes" window, only the modules with their own node address (Ethernet, MPI or
PROFIBUS address) are ever visible.