Technical data

Configuring Messages
16.9 Configuring the 'Reporting of System Errors'
Programming with STEP 7
380 Manual, 05/2010, A5E02789666-01
Diagnostic Field ID (faulty slot) Channel
Designation
(channel error) 1)
Module Status
(module error,
incorrect/no
module)
Device Designation
ET 200L Not evaluated - -
ET 200B Digital - - - Message:
"Diag info available"
ET 200B Analog - - - -
ET 200C Digital - - - -
ET 200C Analog Message:
"Diagnostic interrupt
was triggered"
- - Message:
"Diag info available"
ET 200U Message:
"Diagnostic interrupt
was triggered"
Message:
"Diag info available"
ET 200iS Message:
"Diagnostic interrupt
was triggered"
Plain-text message Plain-text message -
ET 200eco - - - Plain-text message
Diagnostic field DS0/DS1
1)
Other version
Header ID
2)
0x00
Type 0x01
0x00
Other Type
ET 200S Plain-text message -
ET 200pro Plain-text message -
ET 200M Plain-text message Not evaluated
ET 200X - -
ET 200X Desina Plain-text message -
ET 200L Plain-text message -
ET 200B Digital - -
ET 200B Analog Plain-text message -
ET 200C Digital - -
ET 200C Analog Plain-text message -
ET 200iS Plain-text message -
ET 200eco - -
1) DS0: Standard diagnostics, for example module fault, external auxiliary voltage or front connector missing,
extent 4 bytes, contained in the local data of the OB 82.
DS1: Channel error, defined differently for each channel type, readable in the user program via SFC 51.
The texts come from the S7 HW diagnostics.
2) Header identifier: Identifier in the diagnostic message that identifies different diagnostic parts.