Specification

WC150XP
16 Gauge 1" Wide Crown Roong Stapler
www.senco.com
©2009 by SENCO Brands, Inc.
SENCO
®
16 Ga. 1" Crown Heavy Wire
Tapered body
Improves line of sight
Adjustable depth-of-drive
High-strength composite
magazine with metal fastener
guide, prevents wear and helps
eliminate skipping, jams and
misres
3/8” Inlet
Increased air ow
Rotating belt hook
Stowable & Portable
Robust ring valve
Fast, powerful, easy to maintain & operate
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions. For additional information on trigger systems and
how SENCO will save you time, reduce costs, and increase quality, call our toll-free
Action Line: 800-543-4596 to nd your nearest Authorized Senco Dealer, Distributor or
visit our web site at: www.senco.com
Choose the right trigger system for your specic needs!
Sequential Actuation Trigger (also known as restrictive trigger or trigger re) operates
in the following a sequence - depress the safety element at the nose of tool against the
work surface then pull the trigger. After each fastener is driven, release the trigger and
lift the tool o the work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom re) operates
in the following sequence- pull the trigger rst and keep the trigger pulled while
moving the tool along the work surface with a bouncing motion, depressing the safety
element at the nose of the tool against the work surface where the fastener is to be
driven. This trigger is recommended for use by trained professionals only in high
production or volume applications.
Full Comfort Overmold Grip –
Reduces fatigue
Cap Exhaust
Directs exhaust downward
Aluminum Housing
Lightweight,
superior durability
Easy-Clear Guide Body
To clear jams fast
Galvanized
5
⁄
8
P10BAB 10.M Chisel Galv Sencote
5
⁄
8
P10FAB 10.M Divergent Galv Sencote
5
⁄
8
P10BPE 10.M Chisel Galv Coated
¾ P11BAB 10.M Chisel Galv Sencote
¾ P11BPE 10.M Chisel Galv Coated
7
⁄
8
P12BAB 10.M Chisel Galv Sencote
1 P13BAB 10.M Chisel Galv Sencote
1¼ P15BAB 10.M Chisel Galv Sencote
1½ P17BAB 10.M Chisel Galv Sencote
5
⁄
8
P10BABB 10.M Chisel Galv Sencote
¾ P11BABB 10.M Chisel Galv Sencote
7
⁄
8
P12BABB 10.M Chisel Galv Sencote
1 P13BABB 10.M Chisel Galv Sencote
1¼ P15BABB 10.M Chisel Galv Sencote
1½ P17BABB 10.M Chisel Galv Sencote
Stainless
1 P13BGBN 5.M Outside Chisel Stainless Sencote
Carton
Length Item Code Count Point Finish Coating
Composite roong, roong felt, corrugated containers,
foam insulation board.