User`s manual

11b/g Wireless Multi-Client Bridge/AP Version 1.0

3.2.1.3 Switch from Bridge to AP Mode

This device can be configured as a Bridge or Access Point. The default IP address

of the device is 192.168.1.1 in Bridge mode. This section will describe the steps to

switch from Bridge to Access Point mode.

 Click on the Switch Device to AP Mode and then you will see a confirmation dialog

box. Click on the OK button to continue.

 Please wait while the system is rebooting.

Note: Do no un-plug the device during this process as this may cause permanent

damage.

 Once the device has restarted you may need to access the management page

through a different IP address. The default IP address for Access Point mode is

192.168.1.2. Refer to Chapter 4 to configure the device in Access Point mode.