User's Manual
Table Of Contents
- Contents
- 1 About This Getting Started Guide
- 2 Unpacking the ZoneFlex Wireless Bridge
- 3 Before You Begin
- 4 Preparing the Wireless Bridge Pair for Installation
- What You Will Need
- Configure the Root Bridge
- Configure the Non-Root Bridge (Optional)
- 5 Physical Installation
- 6 Deploying the Wireless Bridge
- 7 Attaching the Mounting Brackets
- 8 Mounting the Wireless Bridge
- 9 Mounting and Connecting the External Antennas (Optional)
- 10 Aiming the Bridge Pair
- 11 Verifying the Connection
- 12 What to Do Next
3
Unpacking the ZoneFlex Wireless Bridge
Package Contents
Mounting Kit Contents
■ Dynamic bracket
■ Static bracket
■ Steel clamps (2 pieces)
■ Machine screws (8 pieces)
■ Hex bolts (4 pieces)
■ Split lock washers (4 pieces)
■ Flat washers (4 pieces)
■ Split lock washers (4 pieces)
■ Machine screws (8 pieces)
■ Thumb screws (2 pieces)
■ Wall anchors (2 pieces)
Figure 1. Mounting kit contents
Dynamic bracket Static bracket Steel clamps (2 pieces)
Hex bolt (4 pieces) Flat washer (4 pieces) Split lock washer (4 pieces)
Thumb screws (2 pieces) Machine screw (8 pieces) Wall anchor with metal cone
and hex nut (2 pieces)