User's Manual

Table Of Contents

What to Do Next

Using FlexMaster to Manage the Wireless Bridge

If you are planning to use Ruckus Wireless FlexMaster to manage the ZoneFlex 7731, this

guide describes the required steps that will enable the Wireless Bridge to report to and

communicate with FlexMaster successfully.

(Optional) Set the FlexMaster Server Address

If you have a FlexMaster server installed on the network and you intend to use FlexMaster

to manage the Wireless Bridge, you can set the FlexMaster server address at this point.

Before starting this procedure, make sure you obtain the correct FlexMaster server URL.

NOTE: In addition to setting the FlexMaster server URL manually on the Wireless Bridge,

you can also use DHCP Option 43 or DNS to point the Wireless Bridge to the FlexMaster

server. For more information, refer to the FlexMaster User Guide.

1. On the menu, click Administration > Management.

2. Scroll down the page to the TR069 / SNMP Management Choice section.

3. Verify that the Auto option is selected.

4. In FlexMaster Server URL, type the URL of the FlexMaster server on the network. You

can use either http or https to connect to the URL and include either the host name

or IP address of the FlexMaster server in the URL. The following are examples of valid

FlexMaster server URLs:

http://flexmaster/intune/server

https://flexmaster/intune/server

http://192.168.20.1/intune/server

https://192.168.20.1/intune/server

5. Click Update Settings to save your changes.

You have completed setting the FlexMaster server address on the Wireless Bridge.