User's Manual
Table Of Contents
- Contents
- 1 About This Getting Started Guide
- 2 Unpacking the ZoneFlex Wireless Bridge
- 3 Before You Begin
- 4 Preparing the Wireless Bridge Pair for Installation
- What You Will Need
- Configure the Root Bridge
- Configure the Non-Root Bridge (Optional)
- 5 Physical Installation
- 6 Deploying the Wireless Bridge
- 7 Attaching the Mounting Brackets
- 8 Mounting the Wireless Bridge
- 9 Mounting and Connecting the External Antennas (Optional)
- 10 Aiming the Bridge Pair
- 11 Verifying the Connection
- 12 What to Do Next
41
Attaching the Mounting Brackets
Step 2: Attach the Dynamic Bracket to the Wireless Bridge
3. Using a 6mm Phillips screwdriver, tighten the four machine screws to fasten the bracket
to the Wireless Bridge. Screw torque value must be 4kg-5kg.
Figure 33. Fasten bracket to the Wireless Bridge
4. Continue to “Mounting the Wireless Bridge” in the next section.