User's Manual
Table Of Contents
- Contents
- 1 About This Getting Started Guide
- 2 Unpacking the ZoneFlex Wireless Bridge
- 3 Before You Begin
- 4 Preparing the Wireless Bridge Pair for Installation
- What You Will Need
- Configure the Root Bridge
- Configure the Non-Root Bridge (Optional)
- 5 Physical Installation
- 6 Deploying the Wireless Bridge
- 7 Attaching the Mounting Brackets
- 8 Mounting the Wireless Bridge
- 9 Mounting and Connecting the External Antennas (Optional)
- 10 Aiming the Bridge Pair
- 11 Verifying the Connection
- 12 What to Do Next
27
Physical Installation
Decide How You Will Supply Power to the Wireless Bridge
WARNING: The Ruckus Wireless PoE injector (if supplied with your Wireless Bridge) is
for indoor use only. Never mount the PoE injector outdoors with the Wireless Bridge.
Decide How You Will Supply Power to the Wireless
Bridge
The Wireless Bridge supports Power over Ethernet (PoE) and 12 VC DC power and can be
connected to both power sources at the same time. If you connect the Wireless Bridge to
both PoE and DC power sources at the same time, it will use PoE as the primary power
source and DC power as the backup power source.