User's Manual
Table Of Contents
- Contents
- 1 About This Getting Started Guide
- 2 Unpacking the ZoneFlex Wireless Bridge
- 3 Before You Begin
- 4 Preparing the Wireless Bridge Pair for Installation
- What You Will Need
- Configure the Root Bridge
- Configure the Non-Root Bridge (Optional)
- 5 Physical Installation
- 6 Deploying the Wireless Bridge
- 7 Attaching the Mounting Brackets
- 8 Mounting the Wireless Bridge
- 9 Mounting and Connecting the External Antennas (Optional)
- 10 Aiming the Bridge Pair
- 11 Verifying the Connection
- 12 What to Do Next
10
Before You Begin
Get to Know the Hardware Features
External Antennas
The ZoneFlex 7731 Outdoor Wireless Bridge includes one purpose designed internal
directional antenna. If you want to extend the range of your wireless network, you can
connect two external high gain antennas to the standard N-type external antenna
connectors on the top panel of the Wireless Bridge. The antennas must have a gain of less
than 23dBi to comply with FCC and CE regulations. For more information, refer to
“
Mounting and Connecting the External Antennas (Optional)” on page 44.
Figure 5. The antenna connectors are protected by metal caps
Metal Cap