User Manual

37
Physical Installation
Become Familiar with the Installation Components
Figure 30. Recommended orientation for optimal performance
Direct
Line of
Sight
Become Familiar with the Installation Components
The ZoneFlex 7731 Wireless Bridge is designed for installation in an outdoor environment,
such as an exterior wall, or the roof overhang of a building, or a streetlight pole. Refer to
Figure 31 for the components involved in a typical installation.
Take note of the components that must be installed indoors an
d outdoors. The PoE injector
and power adapter that are shipped with the Wireless Bridge are for indoor use only.
Ruckus Wireless also strongly recommends that you form a drip loop on any cable that is
connected to devices that are installed outdoors (for example, the Wireless Bridge and
the Ethernet surge protector).