User Manual

20
Pre-Installation Configuration
Access the Web Interface
Figure 11. Ruckus ZoneFlex 7731 Wireless Bridge Status :: Wireless page
8. Continue to Step 5: Change the Country Code.
Step 5: Change the Country Code
Change the Country Code setting to your location and reboot the bridge for updates to
take effect.
CAUTION: If changing the Country Code after the pair has been mounted, you will need
to configure the remote unit first followed by the local unit, to avoid loss of connectivity.
NOTE: If you purchased the Wireless Bridge in the United States, this value is fixed to
“United States” at the factory and is not user configurable.
If you purchased the Wireless Bridge outside of the United States, verify that the value is
set to your country or region. Selecting the correct country code ensures that the Wireless
Bridge uses only the radio channels allowed in your country or region.
1. On the Configuration > Wireless page, select your location from the Country Code
menu.
2. The f
ollowing warning message appears: