User Manual

16
Pre-Installation Configuration
Access the Web Interface
Figure 8. Connect the DC terminal block to the 12V DC port
6. Connect the DC cable to a DC power source (for example, a battery).
You have completed connecting the Wireless Bridge to a DC power source.
Step 2: Prepare the Administrative Computer
NOTE: The following procedure is applicable if the administrative computer is running
Windows XP or Windows 2000. If you are using a different operating system, refer to the
documentation that was shipped with your operating system for information on how to
modify the computer’s IP address settings.
1. On your Windows XP or Windows 2000 computer, open the Network Connections (or
Network and Dial-up Connections) control panel according to how the Start menu is
set up:
• On Windows XP, click Start > Control Panel > Network Connections.
• On Windows 2000, click Start > Settings > Network Connec
tions.
2. Wh
en the Network Connections window appears, right-click the icon for Local Area
Connection, and then click Properties.