User Manual

8
Before You Begin
Get to Know the Hardware Features
Table 2. LEDs and bottom panel connectors
No Label Description
1 LEDs See
“LED Colors and What They Mean” below for more
information.
2 RJ45 LAN port that supports Power over Ethernet (PoE) and 10/
100/1000 Mbps network connections
3 Reset Using a pointed object (for exa
mple, a pen), press this
button to restart the Wireless Bridge or to restore it to
factory default settings:
• To restart the Wireless Bridge, press the Reset button
once.
• To restore the Wireless Bridge to factory default, press
t
he Reset button for six (6) seconds.
WARNING: Restoring the Wireless Bridge to factory
defa
ult settings removes all configuration changes that
you have made. These include the IP address, password,
access control list, and wireless settings. Returning the
configuration of these features to their factory default
settings may result in network connectivity issues.
4
12V DC In addition to PoE, you can also use direct current or DC
(
from a battery, for example) to supply power to the
Wireless Bridge.
5 Aiming Button Press this button to set the Wireless Bridge to Aiming
Mode. When Aiming Mode is set, the LEDs can be used
to determine signal strength. See
“Aiming Mode” for
more information.