User Manual

59
Verifying the Connection
Mounting and Connecting the External Antenna (Optional)
8 Verifying the Connection
Once you have completed the hardware installation and aiming procedure for both
Wireless Bridges, verify the connection and signal integrity between the bridge pair using
the following procedure:
1. Acc
ess the root bridge Web interface by entering its IP address into a Web browser
on a computer connected to the same switch that the root bridge is connected to.
2. On the Status > Wir
eless page, check to make sure the non-root bridge is listed under
the Connected Device section.
Figure 53. Viewing connected device fr
om the Web interface
3. On the Status > Wireless page, click the SpeedFlex icon to launch the SpeedFlex
Wireless Performance Test.
4. Click St
art to begin testing
5. Once the test i
s completed, the following result page is displayed.