User Manual

Physical Installation

Mounting the Wireless Bridge

• The dynamic bracket (attached to the Wireless Bridge) encloses the static bracket

(attached to the mounting surface).

• (For mounting on a vertical

pole) The side of the Wireless Bridge with the antenna

connectors is at the top, especially if you are planning to install external antennas.

Figure 49. Joining the two brackets in a vertical pole

installation

2. Align the mounting holes on the dynamic bracket with the mounting holes on the static

bracket.

3. Place a

split lock washer, and then a flat washer onto a hex bolt. Then insert the hex

bolt into one of the lower mounting holes.