User Manual
Table Of Contents
- Contents
- 1 About This Getting Started Guide
- 2 Unpacking the ZoneFlex Wireless Bridge
- 3 Before You Begin
- 4 Pre-Installation Configuration
- Summary of Pre-Installation Tasks
- What You Will Need
- Access the Web Interface
- Step 1: Connect the Power and Ethernet Cables
- Step 2: Prepare the Administrative Computer
- Step 3: Connect the Wireless Bridge to the Admin Computer
- Step 4: Log In to the Web Interface
- Step 5: Change the Country Code
- Step 6: Change Optional Configuration Settings
- Step 7: Change Non-Root Bridge Configuration Settings
- Step 8: Test the Link Between the Bridges
- Step 9: Disconnect the Wireless Bridge from the Administrative Computer
- Step 10: Restore the Administrative Computer’s Network Settings
- 5 Provisioning and Associating the Wireless Bridge Pair (Optional)
- 6 Physical Installation
- Prepare the Required Hardware and Tools
- Determine the Optimal Mounting Location and Orientation
- Become Familiar with the Installation Components
- Decide How You Will Supply Power to the Wireless Bridge
- Deploying the Wireless Bridge
- Attaching the Mounting Brackets
- Mounting the Wireless Bridge
- Mounting and Connecting the External Antenna (Optional)
- 7 Aiming the Bridge Pair
- 8 Verifying the Connection
- 9 What to Do Next
2
Unpacking the ZoneFlex Wireless Bridge
Package Contents
2 Unpacking the ZoneFlex Wireless Bridge
1. Open the Wireless Bridge package, and then carefully remove the contents.
2. Return all packing materials to the shipping box, and put the box away in a dry location.
3. V
erify that all items listed in Package Contents below are included in the package.
Check each item for damage. If any item is damaged or missing, notify your authorized
Ruckus Wireless sales representative.
Package Contents
The standard ZoneFlex 7731 Wireless Bridge package contains two ZoneFlex 7731 units
and two sets of accessories (one for each unit). A single unit package contains one
ZoneFlex 7731 unit and one set of accessories. Refer to
Tabl e 1 for package contents for
either the single unit package or dual unit package.
Table 1. Package contents
Single Unit Two Units
• One ZoneFlex 7731 Point to Point
Wireless Bridge
• One PoE injector box (excluded in some
SKUs)
• One Power adapter box (SW DC48V/
0.42A AC100-240V
) for the PoE injector
(excluded in some SKUs)
• One mounting kit (see
“Mounting Kit
Contents” for details)
• One bag containing bottom Wireless
Bridge cover and related accessories
(see
“Bottom Cover and Accessories”
for details)
• Service Level Agreement / Limited
W
arranty Statement
• Regulatory Statement
• This Getting Started Guide
• Two ZoneFlex 7731 Point to Point
W
ireless Bridge units, pre-provisioned as
a “Root Bridge” and a “Non-Root
Bridge”
• Two PoE injector boxes (excluded in
som
e SKUs)
• Two power adapter boxes (SW DC48V/
0.4
2A AC100-240V) for the PoE injector
(excluded in some SKUs)
• Two mounting kits (see
“Mounting Kit
Contents” for details)
• Two bags containing bottom Wireless
Bridge cover a
nd related accessories
(see
“Bottom Cover and Accessories” for
details)
• Service Level Agreement / Limited
W
arranty Statement
• Regulatory Statement
• This Getting Started Guide