User Manual
Table Of Contents
- Contents
- 1 About This Getting Started Guide
- 2 Unpacking the ZoneFlex Wireless Bridge
- 3 Before You Begin
- 4 Pre-Installation Configuration
- Summary of Pre-Installation Tasks
- What You Will Need
- Access the Web Interface
- Step 1: Connect the Power and Ethernet Cables
- Step 2: Prepare the Administrative Computer
- Step 3: Connect the Wireless Bridge to the Admin Computer
- Step 4: Log In to the Web Interface
- Step 5: Change the Country Code
- Step 6: Change Optional Configuration Settings
- Step 7: Change Non-Root Bridge Configuration Settings
- Step 8: Test the Link Between the Bridges
- Step 9: Disconnect the Wireless Bridge from the Administrative Computer
- Step 10: Restore the Administrative Computer’s Network Settings
- 5 Provisioning and Associating the Wireless Bridge Pair (Optional)
- 6 Physical Installation
- Prepare the Required Hardware and Tools
- Determine the Optimal Mounting Location and Orientation
- Become Familiar with the Installation Components
- Decide How You Will Supply Power to the Wireless Bridge
- Deploying the Wireless Bridge
- Attaching the Mounting Brackets
- Mounting the Wireless Bridge
- Mounting and Connecting the External Antenna (Optional)
- 7 Aiming the Bridge Pair
- 8 Verifying the Connection
- 9 What to Do Next
27
Pre-Installation Configuration
Access the Web Interface
Figure 19. Administration :: Management page
If you want to manage the Wireless Bridge using SNMP even when a FlexMaster server is
available, select SNMP only under “TR069/SNMP Management Choice,” then enter the
Read-Only/Read-Write Community information, along with the SNMP Trap server IP
address in the appropriate spaces. Click Update Settings to confirm changes.
The SNM
P ACL option allows you to restrict the number of devices that can access the
Wireless Bridge for management purposes. If the SNMP ACL (access control list) is
disabled, then any device on the network will be able to access the Wireless Bridge using
SNMP commands.