User's Manual

ESR600H/ESR750H
6-46
USER GUIDE
BASIC NETWORK SETTINGS
CONFIGURING ADVANCED SETTINGS
 Data Rate: Select the data rate. This is the rate in which
the DEVICE will transmit data packets to wireless
devices.
 N Data Rate Select the N data rate. This is the rate in
which the DEVICE will transmit data packets to wireless
N compatible devices.
 Channel Bandwidth Select the channel bandwidth. The
factory default is Auto 20/40MHz. The default setting
provides the best performance by auto selecting channel
bandwidth.
 Preamble Type Select the preamble type. Long Pre-
amble provides better LAN compatibility and Short
Preamble provides better wireless performance.
 Tx Power Select the wireless signal strength level. Valid
values are between 10% and 100%.
 Country Selection Select the country where the wire-
less network is located.
Click Apply to save the settings or Cancel to discard
changes.