User's Manual

ESR600H/ESR750H
6-30
USER GUIDE
BASIC NETWORK SETTINGS
CONFIGURING ADVANCED SETTINGS
6.3.2 Configuring Advanced Settings
Advanced settings parameters available on the router.
WARNING!
!
Incorrectly changing these settings may cause the device to stop functioning. Do not modify the settings in this
section without a thorough understanding of the parameters.
 Fragment Threshold Enter the maximum size of a
packet during data transmission. A value too low could
lead to low performance.
 RTS Threshold Enter the RTS threshold. If the packet
size is smaller than the RTS threshold, the ESR600H/
ESR750H does not use RTS/CTS to send the data
packet.
 Beacon Interval Enter the beacon interval. This is the
amount of time that the DEVICE sets to syn- chronize the
network.
 Delivery Traffic Indication Message (DTIM) Period
Enter the DTIM period. The DTIM is a countdown period
informing clients of the next point of broadcast and multi-
cast of messages over the network. Valid values are
between 1 and 255.