User's Manual

ESR600H/ESR750H
6-73
USER GUIDE
ADVANCED NETWORK SETTINGS
PORT MAPPING SETUP
6.7.2 Port Mapping Setup
Port Mapping allows you to redirect a particular range of service port numbers from the WAN to a particular LAN IP address.
 Enable Port Mapping Click Enable Port Mapping to
activate port mapping.
 Description Enter notes or details about the mapped
port range configuration.
 Local IP Enter the local IP address of the server behind
the NAT firewall.
 Protocol Select the protocol to use for mapping from the
following: TCP, UDP or Both.
 Port Range Enter the range of ports to be forwarded.
Click Add to append a new device to the list or Reset to dis-
card changes.