User's Manual

ESR600H/ESR750H
6-70
USER GUIDE
BASIC NETWORK SETTINGS
CONFIGURING A VPN TUNNEL PROFILE
On the Network tab, enter the following information:
VPN Server IP Setting
 Server IP: enter an IP address which is different from
your router’s LAN IP address.
For example:
If the LAN IP of the DEVICE is 192.168.0.1, configure
the server IP address as 10.2.2.1.
 Remote IP Range: enter an IP range under the same
subnet of the above server IP.
For example:
If the server IP address is 10.2.2.1, configure a remote IP
range of 10.2.2.10 – 20.
IMPORTANT:
The remote IP range should not include the server IP
address to avoid a network conflict.
Click Apply to save the settings or Cancel to discard
changes.