User's Manual
6 7
8. If your router does not auto-detect an Internet connec-
tion, you will be presented with a screen asking for basic
conguration information as required by your Internet
Service Provider, as shown in Figure 3.
9. After this step, or if your router does auto-detect an
Internet connection, you will be automatically directed to
create an account for the Cloud service and subsequently to
a wizard that will guide you to congure your network in a
few easy steps.
10. Once the setup wizard is complete you router will restart
and you will temporarily lose connectivity
11. As your CR3000 Router restarts, please wait about 3 min-
utes. The LEDs on the top of the unit will cycle multiple times
as the Router is automatically congured by CloudCommand.
When the AMBER LED (power) settles to a steady light, your
Router is congured and ready for use.
12. Once the setup is complete, upon rst connection
to CloudCommand, the router will perform a rmware
upgrade. This will take up to 5 minutes, during which you
SHOULD NOT POWER DOWN the router or disconnect it
from the Internet.
Figure 3: Screen asking for basic conguration information.