User's Manual
4 5
Step 2: Setup and First Conguration
Option 1: You have active Internet access and your modem provides automatic DHCP service
1. While connected to the Internet using your old router, visit http://enable.cloudcommandxp.com.
2. Create an account or login with your Google credentials and follow the setup wizard.
3. Once the setup wizard is complete, disconnect your old router from your DSL/CABLE modem or the network port
with access to the Internet you are intending to connect the CR3000 Router to.
4. If using a DSL/CABLE modem, restart it now by power-cycling it.
5. Using the provided Ethernet cable (RJ45), connect the BLUE port marked INTERNET on your CR3000 Router to your
broadband DSL/CABLE modem or other network port with access to the Internet.
6. Power on your CR3000 Router by plugging the supplied power adapter into a power outlet and connecting it to the
rear of the Router.
7. As your CR3000 Router starts, wait about 3 minutes. The LEDs on the top of the unit will cycle multiple times as the
CR3000 Router is automatically congured by CloudCommand. When the AMBER LED (power) settles to a steady light,
your Router is congured and ready to for use.
8. Once the setup is complete, upon rst connection to CloudCommand, the router will perform a rmware upgrade. This
will take up to 5 minutes, during which you SHOULD NOT POWER DOWN the router or disconnect it from the Internet.