User's Manual

13 Repeater Mode

Repeater mode has limited settings compared to the AP mode. Choose

“Repeater mode” on the top right corner of the configuration page.

System restarts and connects to the IP address http://192.168..0.1

You will see the configuration homepage under “REPEATER” mode now.

 System

- Status

System status section allows you to monitor the current status of your router. You

can use the status page to quickly see if you have any updated firmware available

(bug fixes, updates). You can navigate from this page with a few interesting options

for reminding or skipping this page forever & so forth.

Once you click on <OK> button to go to the requested page, you can see the

status page of the WBR2100AFN.

You can see the UP time, hardware information, serial number as well as firmware

version information.