User's Manual

9 Bring up WBR2100AFN

Connect the supplied power-adapter to the power inlet port and connect it to a

wall outlet. Then, WBR2100AFN automatically enters the self-test phase. During

self-test phase, Power LED will blink briefly, and then will be lit continuously to

indicate that this product is in normal operation.

10 Smart Wizard

CHECK

• Internet connection should be setup & ready to use (ADSL or cable modem).

• Modem must provide RJ45 port to connect with WBR2100AFN.

• Microsoft Windows compatible PC/Notebook with UPnP enabled network

adapter

• CAT 5 network cable(s), RJ45 port on PC/Notebook.

STEP 1

Connect WBR2100AFN WAN port & your modem WAN port with RJ45 cable.

STEP 2

Power up WBR2100AFN.POWER led on front panel lights up & remains

stable.

STEP 3

Connect WBR2100AFN LAN port & PC/Notebook RJ45 port with network

cable.