User Manual Part 1

IEEE802.11b/g/n Wireless LAN USB 2.0 Client Adapter Version 1.0

h Click on the OK button to close this window.

h dBm Check Box. When you click on the check box as the drawing

below. The signal strength and noise level will be shown as the dBm

measurements.

2.6 Site Survey

The Site Survey tab displays a list of Access Points and Stations in the area, and

allows you to connect to a specific one. The following information is included in

this tab, as the image depicts below.

h SSID: Displays the SSID of the Access Point. The SSID is a unique

name shared among all points in your wireless network. The SSID must

be identical for all points in the network, and is case-sensitive.

h BSSID: Displays the MAC address of the Access Point.

h Signal: Displays the receiving signal strength from the Access Point.

h Channel: Displays the channel number of the Access Point.

h Encryption: Displays the encryption on the Access Point, this includes

WEP, TKIP, AES or None.

h Authentication: displays the authentication on the Access Point, this

includes WPA, WPA-PSK, WPA2, or Unknown.

h Network Type: Indicates whether the SSID is a Station (Ad-hoc) or

Access Point (Infrastructure).

h Rescan: Click on this button to view a list of Access Points in the area.

h Connect: to connect with a specific Access Point, select the SSID from

the list, and then click on the Connect button.