User Manual Part 1

IEEE802.11b/g/n Wireless LAN USB 2.0 Client Adapter Version 1.0

2.3.1 Infrastructure Mode

The infrastructure mode requires the use of an Access Point (AP). In this mode,

all wireless communication between two computers has to be via the AP. It

doesn’t matter if the AP is stand-alone or wired to an Ethernet network. If used in

stand-alone, the AP can extend the range of independent wireless LANs by

acting as a repeater, which effectively doubles the distance between wireless

stations.

h Profile: Enter a name for the profile; this does not need to be the same

as the SSID.

h SSID: Enter the SSID of the network or select one from the drop-down

list. The SSID is a unique name shared among all points in your wireless

network. The SSID must be identical for all points in the network, and is

case-sensitive.

h Network Type: Select Infrastructure from the drop-down list.

h TX Power: Select a transmit power from the drop-down list. If your

notebook is connected to external power then select 100% or auto, if

not, select one of the lower values for power saving.

h Click on the Apply button to save the changes.