User Manual Part 1

IEEE802.11b/g/n Wireless LAN USB 2.0 Client Adapter Version 1.0

6. An EG icon will then appear in the system tray. Right click on the EG icon and

then click on Launch Config Utilities.

Note: Click on Use Zero Configuration as Configuration Utility if you would

like to use Windows Zero Config.

2.3 Profiles

The Profile tab is used to store the settings of multiple Access Points such as

home, office, café, etc. When adding a profile you are required to enter a profile

name and SSID as well as configure the power-saving mode, network type,

RTS/fragmentation threshold and encryption/authentication settings. A profile

can be configured as Infrastructure or Ad-hoc mode. The configuration settings

for each mode are described below.