User's Manual

EUB-9701/9702 series --IEEE802.11b/g/n Wireless LAN USB 2.0 Client Adapter Version 1.0

3.6 Advanced Configuration

The Advanced tab is used to configure the wireless mode (802.11g, 802.11b/g-

mixed, or 802.11b/g/n-mixed), Tx burst, and CCX.

 Wireless mode: Select 802.11 b/g/n mix if the wireless network uses both

11b, 11g, and 11n stations and APs. B/G Protection: This is the ERP

protection mode of 802.11g. Selecting auto will dynamically send frames

with and without protection. Select On to send a frame without protection,

and Off to send it with protection.

 Enable Tx BURST: Click the check box will enhance the throughput

 Enable TCP Window Size: Enhance the throughput if enable this function.

 CCX: Enable this option if the network supports Cisco Compatible

Extensions.

 Click on the Apply button to close this window.

3.7 Statistics

The Statistics tab displays transmit and receive packet statistics in real-time.

Information included is frames transmitted/received successfully, transmitted

successfully without and after retry, received with CRC error, duplicate frames

received, etc.