User Manual Part 1

4.1.3. PPTP (Point-to-Point Tunneling Protocol)

 PPTP (Point to Point Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection requires

you to enter a username and password (provided by your ISP) to gain access to the Internet. The supported authentication

protocols are PAP and CHAP.

 Address Mode: PPTP can be used with a dynamic or static IP address. If you select the Dynamic IP radio button, then the IIP

address in the next field is not required. However, if you select the Static IP radio button, then the IP address in the next field is

required.

 PPTP IP Address: Specify the IP address

 PPTP Subnet Mask: Specify the subnet Mask for the IP address.

 PPTP Gateway IP Address: Specify the IP address of the PPTP gateway.