User Manual Part 1

2. Understanding the Hardware

2.1. Hardware Installation

1. Place the device in an appropriate location after conducting a site survey.

2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook.

3. Plug one end of another Ethernet cable to WAN port of the device and the other end into you cable/DSL modem (Internet)

4. Insert the DC-inlet of the power adapter into the port labeled “POWER” and the other end into the power socket on the wall.

This diagram depicts the hardware configuration

WLAN Router

Pow

er Outlet

Ethernet

AC/DC cable

Ethernet

Cable / DSL

Modem