User Manual

2.6. Smart Wizard CD

Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet.

Then, the router automatically enters the self-test phase. During self-test phase, Power LED

will blink briefly, and then will be lit continuously to indicate that this product is in normal

operation.

CHECK

• A standard CD-ROM drive

• Internet connection should be setup & ready to use (ADSL or cable modem).

• Modem must provide RJ45 port to connect with ESR9850.

• Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter

• CAT 5 network cable(s), RJ45 port on PC/Notebook.

STEP 1

Connect ESR9850 WAN port & your modem WAN port with RJ45 cable.

STEP 2

Power up ESR9850. POWER led on front panel lights up & remains stable.

STEP 3

Connect ESR9850 LAN port & PC/Notebook RJ45 port with network cable.

STEP 4

Insert Wizard CD into your CD-ROM drive. If Wizard does not start automatically,

please browse it with Windows Explorer.

Click on “Wizard.exe” to activate SMART WIZARD.