User Manual

Radio: Enable or Disable Wireless function

Band: Allows you to set the AP fixed at 802.11b, 802.11g or 802.11n mode. You

can also select B+G mode to allow 802.11b and 802.11g clients at the

same time.

SSID: This is the name of the wireless signal which is broadcasted. All the

devices in the same wireless LAN should have the same ESSID.

Channel Number: The channel used by the wireless LAN. All devices in the

same wireless LAN should use the same channel.

Site Survey: You can scan the current Wireless Access Point and connect on it.

- Tools

This section has many useful and miscellaneous features.

- Admin

You can change the password required to log into the broadband router's

system web-based management. By default, the password is: admin. Passwords

can contain 0 to 12 alphanumeric characters, and are case sensitive.