User Manual

Radio

Enable or Disable wireless.

Mode

Select from Access Point (AP) or Wireless Distribution System (WDS) modes.

(Default: AP)

Band

Select the types of wireless clients that the device will accept.

Example:

5 GHz (a/n): All 802.11a/n clients will be allowed.

5 GHz (a): Only 802.11a clients will be allowed.

5 GHz (n): Only 802.11n clients will be allowed.

Enable SSID#

Select the number of SSIDs (Wireless Networks) you would like to enable.

You can create up to 4 separate wireless networks by enabling 4 SSIDs.

SSID#

Enter the name of your wireless network. You can use up to 32 characters.

Example: “Life Is Good”, “Guest Network”, etc.

Channel

Manually select which channel the wireless signal will use.