User Manual

71
Wi-Fi Protected Setup Information
WPS Current Status Shows whether the WPS function is Configured or Unconfigured.
Configured means that WPS has been used to authorize connection between
the device and wireless clients.
SSID
The SSID (name of the wireless network) used when connecting using WPS.
Authentication Mode
The encryption method used by the WPS process.
Passphrase Key
This is the passphrase key that is randomly generated during the WPS
process. It is required if wireless clients that do not support WPS attempt to
connect to the wireless network.
WPS Via Push Button
Click this button to initialize the WPS feature using the push button method.
WPS Via PIN Enter the PIN code from wireless adapter and then click [Start to Process]
button to initialize the WPS feature.
There are two methods to initialize the WPS feature: WPS via Push Button (PBC) and WPS via Pin (PIN).
1. Push Button Method (PBC – Push Button Connect)
Press the WPS button on your wireless adapter and press the WPS button on the top panel of the Router to establish
the connection.