User Manual

58
Basic
Radio
Enable or Disable wireless.
Mode
Select from Access Point (AP) or Wireless Distribution System (WDS) modes.
(Default: AP)
Band
Select the types of wireless clients that the device will accept.
Example:
2.4 GHz (b/g/n): All 802.11b/g/n clients will be allowed.
2.4 GHz (b/g): Only 802.11b/g clients will be allowed.
2.4 GHz (n): Only 802.11n clients will be allowed.
Enable SSID#
Select the number of SSIDs (Wireless Networks) you would like to enable.
You can create up to 4 separate wireless networks by enabling 4 SSIDs.
SSID#
Enter the name of your wireless network. You can use up to 32 characters.
Example: “Life Is Good”, “Guest Network”, etc.
Auto Channel
When Enabled, the Router will scan the wireless signals around your area and
select the channel with the least interference.
When Disabled, you will need to configure the Channel settings on the Router.
Channel
Manually select which channel the wireless signal will use.
Check Channel
Time
When Auto Channel is Enabled, you can specify the frequency the Router will
scan the wireless signals around your area.