User Manual

56
Point-to-Point Tunneling Protocol (PPTP)
WAN Interface Type
Select whether the ISP is set to Static IP or will allocate Dynamic IP addresses.
Hostname
This is optional. Only required if specified by ISP
MAC address
The MAC Address that is used to connect to the ISP.
Login
Username assigned to you by the ISP
Password
Password for this username.
Service IP Address
The IP Address of the PPTP server.
Connection ID
This is optional. Only required if specified by ISP
MTU The maximum size of packets.
Do not change unless mentioned by the ISP.
Type
You can choose the method that the router maintains connection with the ISP.
Keep Connection: The device will maintain a constant connection with the ISP.
Automatic Connection: The device will only initiate connection to the ISP
when there is an Internet connection request made from a LAN device.
Manual Connection: The user will need to manually connect to the ISP by
clicking the Connect button.
Idle Timeout If the connection type is Automatic Connection, the Router will automatically
disconnect from the ISP when there has been no Internet traffic.
Note: Specify the Idle time in minutes.