User Manual

[ pg. 75]
Advanced > Port Mapping
Port Mapping allows you to re-direct a particular range of service port numbers (from the Internet / WAN Port) to a particular LAN IP address.
1. Enable Port Mapping: Mark the checkbox to Enable Port Mapping.
2. Description: Enter the description on why the ports will be mapped.
3. Local IP: The local IP address of the server behind the NAT firewall.
4. Protocol: Select whether TCP, UDP, or Both ports will be mapped.
5. Port Range: Enter the range of ports to be forwarded to the private IP.
Click Add when finished with the configuration. Then the added Port Mapping setting will be listed on the Current Port Mapping Table. Click
Apply to enable your setting.